CRH 16 VUUR Heavy Duty Stud Type Cam Follower 15.875x25.4x15.875 mm Track Roller Bearing CRH16VUUR CRH 16
A part of our products:
CRH 16 VUUR Heavy Duty Stud Type Cam Follower
15.875x25.4x15.875 mm Track Roller Bearing
CRH16VUUR CRH 16 pictures show:
Drawing of CRH 16 VUUR Heavy Duty Stud Type Cam
Follower 15.875x25.4x15.875 mm Track Roller Bearing
CRH16VUUR CRH 16 :
Description of cam follower bearing:
While roller cam followers are similar to roller bearings, there are quite a few differences.
Standard ball and roller bearings are designed to be pressed into a rigid housing, which provides
circumferential support. This keeps the outer race from deforming, so the race cross-section
is relatively thin. In the case of cam followers the outer race is loaded at a single point, so the
outer race needs a thicker cross-section to reduce deformation. However, in order to facilitate
this roller diameter must be decreased, which also decreases the dynamic bearing capacity.
End plates are used to contain the needles or bearing axially. On stud style followers one of the
end plates is integrated into the inner race/stud; the other is pressed onto the stud up to a
shoulder on the inner race. The inner race is induction hardened so that the stud remains soft if
modifications need to be made. On yoke style followers the end plates are penned or pressed
onto the inner race or liquid metal injected onto the inner race. The inner race is either induction
hardened or through hardened.
Another difference is that a lubrication hole is provided to re-lubricate the follower periodically.
A hole is provided at both ends of the stud for lubrication. They also usually have a black oxide
finish to help reduce corrosion.
1.Cam Follower is a bearing having thick outer ring and a stud to which needletype rollers
are built into, and it is a bearing having small friction coefficient and excellent rotational
performance designed for outer ring revolution.
2.With the purpose of increasing the load area effectively, this bearing is designed so that
the radial gap is smaller than the general needle roller bearings. Therefore, it alleviates the
impact load, and a stable longlife is gained. Since the stud undergoes screw processing and
stepped processing, they can be attached easily.
3.Cam Followers come in series of abundant types such as those with cages, full complement,
shield type, sealed type, spherical outer ring, cylindrical outer ring and ones with hexagon
Related models and specifications of CRH 16 VUUR Heavy
Duty Stud Type Cam Follower 15.875x25.4x15.875 mm
Track Roller Bearing CRH16VUUR CRH 16 :
|Shaft diameter||shield type||sealed type||Mass|
|mm||With Spherical outer ring||with cylindrical outer ring||with spherical outer ring||with cylindrical outer ring||g||D||C||d1|
|6.35||CRH 8-1 VR||CRH 8-1 V||CRH 8-1 VUUR||CRH 8-1 VUU||12||12.7||9.525||6.35|
|6.35||CRH 9 VR||CRH 9 V||CRH 9 VUUR||CRH 9 VUU||15||14.288||9.525||6.35|
|7.938||CRH 10-1 VR||CRH 10-1 V||CRH 10-1 VUUR||CRH 10-1 VUU||23||15.875||11.112||7.938|
|7.938||CRH 11 VR||CRH 11 V||CRH 11 VUUR||CRH 11 VUU||27||17.462||11.112||7.938|
|11.112||CRH 12 VR||CRH 12 V||CRH 12 VUUR||CRH 12 VUU||39||19.05||12.7||11.112|
|11.112||CRH 14 VR||CRH 14 V||CRH 14 VUUR||CRH 14 VUU||49||22.225||12.7||11.112|
|15.875||CRH 16 VR||CRH 16 V||CRH 16 VUUR||CRH 16 VUU||93||25.4||15.875||15.875|
|15.875||CRH 18 VR||CRH 18 V||CRH 18 VUUR||CRH 18 VUU||109||28.575||15.875||15.875|
|19.05||CRH 20 VR||CRH 20 V||CRH 20 VUUR||CRH 20 VUU||176||31.75||19.05||19.05|
|19.05||CRH 22 VR||CRH 22 V||CRH 22 VUUR||CRH 22 VUU||200||34.925||19.05||19.05|
|22.225||CRH 24 VR||CRH 24 V||CRH 24 VUUR||CRH 24 VUU||296||38.1||22.225||22.225|
|22.225||CRH 26 VR||CRH 26 V||CRH 26 VUUR||CRH 26 VUU||329||41.275||22.225||22.225|
|25.4||CRH 28 VR||CRH 28 V||CRH 28 VUUR||CRH 28 VUU||463||44.45||25.4||25.4|
|25.4||CRH 30 VR||CRH 30 V||CRH 30 VUUR||CRH 30 VUU||508||47.625||25.4||25.4|
|28.575||CRH 32 VR||CRH 32 V||CRH 32 VUUR||CRH 32 VUU||722||50.800(2 )||31.75||28.575|
|28.575||CRH 36 VR||CRH 36 V||CRH 36 VUUR||CRH 36 VUU||858||57.15||31.75||28.575|
|31.75||CRH 40 VR||CRH 40 V||CRH 40 VUUR||CRH 40 VUU||1 260||63.5||38.1||31.75|
|31.75||CRH 44 VR||CRH 44 V||CRH 44 VUUR||CRH 44 VUU||1 460||69.85||38.1||31.75|
|38.1||CRH 48 VR||CRH 48 V||CRH 48 VUUR||CRH 48 VUU||2 100||76.2||44.45||38.1|
|38.1||CRH 52 VR||CRH 52 V||CRH 52 VUUR||CRH 52 VUU||2 380||82.5||44.45||38.1|
|44.45||CRH 56 VR||CRH 56 V||CRH 56 VUUR||CRH 56 VUU||3 240||88.9||50.8||44.45|
|50.8||CRH 64 VR||CRH 64 V||CRH 64 VUUR||CRH 64 VUU||4 960||101.6||57.15||50.8|
Jinan Sheng Lei bearing Co., Ltd. is located in the "Spring City" Jinan. We Insist the integrity and pragmatic, win-win business philosophy, adhere to the people-oriented, advancing enterprise spirit and regard "quality first, customers utmost" as enterprise concept. Our company has established a professional sales network to help customers get products information at the first time. Our products are exported to many countries now, we have won good reputation and feedbacks from our customer. We offer high quality products with reasonable price and short delivery time.
Certificate: ISO 9001:2008
The production process:
Participate in the exhibition:
A: 30% T/T in advance .70% against copy of B/L
B.30% T/T in advance .70% against L/C at sight
1. I couldn’t find a design to fit my application in your catalog.
Can you help me design a bearing?
Yes, technical expertise is available to assist you with engineering design
for custom products. Available options include, but are not limited to,
custom rings, retainers, balls, shields, lubricants, and packaging.
We look forward to working with you to satisfy your rotary motion
2. What causes bearing noise?
Bearing noise is a function of both the bearing and the way it is used.
Some external factors that affect bearing noise include lubricant type,
excessive bearing load, and improper installation. Once the abnormal
noise occurred, you can contact our engineers, we will help you find
the reasons and provide the appropriate solutions.
3. How long is your delivery term?
Our standard product delivery term is normally 30 days. A new product
development cycle is 60 days in normal. Under normal circumstances, there
are standing stock for regular types. You can email us to learn more details.
4. Where is your port of shipment located?
Our main port of shipment is Guangzhou port, and we may operate at other
ports if required by the customer.
Product Categories : Track Roller Bearing
Premium Related Products