Wholesale ABEC-9 608-2RS Skateboard Ceramic Bearings
A part of our products:
ZYSL Wholesale ABEC-9 608-2RS Skateboard Ceramic
Full ceramic bearing introduction:
Full Ceramic Bearings have the characteristics of anti-magnetic insulation, abrasion resistant,
oil-free self-lubricating and enduring extreme high or low temperature, so they can be used for
harsh environment and even under some special condition. The material of rings and rollers is jar
gonia(ZrO2) and the holder uses poly back fluoride(PTFE) as standard configuration. Generally,
we can use the reinforced nylon made of glass fiber 66(GRPA66-25), special engineering plastics
(PEEK, PI), nonrust steel(AISI SUS316 SUS304), brass(Cu) and so on. Ceramic deep groove ball
bearings are made entirely of ceramic material and are superior to common Steel Angular Contact
Bearings in many ways. Ceramic is the perfect material for any application seeking to achieve higher
RPM's, reduce overall weight or for extremely harsh environments where high temperatures and
corrosive substances are present.
The advantages of ceramic Deep Groove Ball Bearing:
1) The ceramic bearing has the feature of corrosion resistance, the ceramic rolling bearing suitable
for operation under harsh conditions covered corrosion media.
2) Since the ceramic ball rolling has lower density than steel, so which is much lighter, so when you
rotate the outer ring centrifugal effect can be reduced by 40% , thus greatly extended service
3) The expansion and contraction of the ceramic affected smaller than steel, and therefore the
gap of the bearing is constant, the bearing allows the temperature changes more severe environment.
4) As the ceramic has higher modulus of elasticity than steel, when the force is not easy deformation,
and therefore help to improve the operating speed and achieve high accuracy.
1) Power Tools
3) Washing Machines
5) Electric Motors
6) Sport Apparaus
7) Textile Machined
8) Skateboard Skate
Drawing of Wholesale ABEC-9 608-2RS Skateboard
Related models and specifications of Wholesale
ABEC-9 608-2RS Skateboard Ceramic Bearings:
|d (mm)||D (mm)||B (mm)||kg|
Full ceramic beating ZrO2 material
Full ceramic beating ZrO2 material has perfect propriety such like suitable for low and high temperatures, high load capacity,corrosion resistance, nonmagnetic insulated and self lubrication, Thus it suit for the specific applications which are not acailable for bearing steel and hybrid construction ceramic Ball Bearing materials.
Full ceramic bearing Si3N4 material
Full ceramic bearing Si3N4 material has similar propriety as ZrO2 material, besides it has low weight, good wear resistance, high hardness, and it can bear higher temperature than ZrO2 material.
Full ceramic bearing SiC material
Compare with other 3 types of ceramic materials, full ceramic bearing SiC material is more outstanding in these aspects: higher chemical corrosion resistance, better strength, higher hardness, higher wear resistance, lower frictional properties, and suitable for the highest temperature.
Full ceramic bearing Al2O3 material
Full ceramic bearing Al2O3 material which uses 99% Al2O3 ceramic, its rolling parts are also using Al2O3 ceramic as well.
Full ceramic plain bearing
Main material for full ceramic plain bearing are ZrO2, Si3N4 and SiC ceramic, diversified dimension can be produced according to the customer require.
Full ceramic bearing of full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no retainer design, the bearing is able to install more ceramic balls than the standard construction, so the heavier load ability increased more. In addition, to avoid the limited of the retainer' s material, this bearing is same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application. This series of bearing is not for high.
Full ceramic bearing with ceramic retainer
For meeting the more demanding requirement of high corrosion, higher of lower temerature, ceramic retainer has better performance on wear resistance, corrosion resistance and self lubrication than retainers with other materials, ceramic , its rolling parts are also usING aL2O3 ceramic as well.
Hybrid construction ceramic ball bearing
Hybrid construction ceramic ball bearing, inner ring and outer ring are made by metal, GCr15 or AISI440Cmakes inner ring and outer ring. Ceramic ball have the following performance as low density, high strength, low friction, wear resistance, self-lubrication and higher rigidity, it's the best choice for rollers of the hybrid construction ceramic which are used in high-speed, high- precision and long life applications.
PTFE has long-term application temperature -200°C to +260°C, has very strongly bears chemistry corosiveness, to chemicals all anti-corrosive, the friction and coefficient is low, has the good electric insulation, certainly not temperature influence.
1. High size stability
2. Continuous working temperature-70°C ~ 26°C
3. Surface friction coefficient 0.05-0.1
4. Anti-aging, don't burning
5. Bears each kind of strong acid Alkali Salt
6. Mechanical is good
7. Insulating prorerty
8. Anti-burns the nature
1. The fluidity is bad
2. Difficult to fuse the processing
3. Cannot weld
Product Categories : Ceramic Bearings
Premium Related Products